As experienced experts Weidmuller supports customers and partners around the world with products, solutions and services in the industrial environment of power, signal and data. Weidmuller is at home in their industries and markets and know the technological challenges of tomorrow. We are therefore continuously developing innovative, sustainable and useful solutions for their individual needs. Together we set standards in Industrial Connectivity.

Let's connect.

Power

Stud Terminal Blocks

  • IEC finger Safe With Hinged Covers
  • UL/CSA Rated for 1000v
  • 14AWG / 600 MCM
  • Power Distribution via 2 and 3 Pole Bus Bars
  • Vibration Resistant Fixed Washer / Nut Assembly
  • Over 15 Configurations Available
weidmuller-ac-dc-power-monitor

AC & DC Power Monitoring

  • Voltage Distribution or Load Monitoring
  • Single or 3 Phase
  • AC current up to 500A
  • Isolated Relay and Analog Outputs
  • cULus and Class/Div Approvals

Power and Distribution Blocks

  • UL 508 SCCR Approved
  • IEC Finger Safe
  • Single and 3 Phase Configuration Options
  • Aluminum & Copper Conductor Acceptance
  • TS-35 Din-Rail or Direct Mountable
weidmuller-power-supplies1weidmuller-power-supplies2

Power Supplies

  • Ranges From 0.5 – 40A
  • Redundancy Options
  • AC and DC Input Voltages
  • Single and 3 Phase Versions
  • Battery Backup Versions
  • Dc/DC Converters
weidmuller-circuit-protection1 weidmuller-circuit-protection2

Circuit Protection

  • Miniature Circuit Breaker
  • Numerous Trip Curves
  • Overcurrent Protection
  • Thermal and Hydraulic Solutions
  • Electronic Protectors
  • AC / DC Protection
weidmuller-surge-protection

Surge Protection

  • For Nominal Voltages 120V – 600V
  • Discharges up to 40kA (8/20 µs)
  • 1,2 and 3 Phase Configurations
  • UL 1449 Edition 3 Approved
  • Integral Thermal Disconnects
  • Pluggable Replaceable SPD Elements
  • Local and Remote SPD Status Indication
weidmuller-surge-protection1

AC Receptacles

  • Simplex and Duplex
  • GFCI
  • UL 508 Approvals
  • Assembly Free
  • Din-Rail or Panel Mountable

Signal

weidmuller-signal-terminal-blocks

Terminal Blocks

  • Global Approvals UL, CSA, IEC, Gost
  • Screw, Tension, Push-in and IDC Terminations
  • UL 508A SCCR Approved
  • Fuse, Feedthrough, Ground, Disconnect
  • Self – Locking Screw Clamp System
weidmuller-signal-fuse-terminal-blocks

Fuse Terminal Blocks

  • 5x20/25mm, 1 ¼” x 1 ¼”, 13/32” x 1 ½ “ and Midget
  • Blown Fuse Indication
  • Low Leakage Terminals (0/5mA)
  • 100% Vibration Resistant
  • Self – Locking Screw Clamp System

weidmuller-signal-interface-solutions

Interface Solutions

  • PLC/DCS Specific Pre-Assembled Cables
  • Integrated Components (Fuses, Disconnect)
  • Compact and Space Saving
  • 1-Wire, 2-Wire and 3-Wire
weidmuller-signal-relays1  weidmuller-signal-relays2

Mechanical and Solid State Relays

  • From 6.1mm
  • Up to 4 Pole C/O
  • Finger-Safe Connections
  • Long Life
  • Inductive Loads
  • High Frequencies
  • Hazardous Approvals
weidmuller-signal-conditioners

Signal Conditioners

  • All Sensor Input
  • All Common Outputs
  • Hazardous Approvals
  • Front Panel Display Options
  • Wide Ambient Temperature
  • DIP and Computer Comfigurable
weidmuller-signal-isolators

Signal Isolators

  • Digital and Analog Signals
  • 2,3 and 4 Wire Models
  • 2-Channel Models & Splitters
  • Ex Isolating Barriers
  • HART Transparent Options
  • Configurable Input / Output
  • From 6mm wide Per Unit
weidmuller-surge-protectors

Surge Protectors

  • For Analog, Status and Network Signals
  • Discharges up to 20kA (8/20µs)
  • Pluggable, Replaceable SPD Versions
  • Local and Remote Status Indicators
  • SPD Element Testing Options
  • Single, Multi-Stage and Floating Signal Protection
  • Integrated Ground Contact Base in Element

Data

weidmuller-signal-terminal-blocks1

Connecting and Patch Cables

  • Cat 5e,6, 7and Profinet (RJ45 and M12)
  • Fiber Optic Cables (SC, ST)
  • Bulk Cable and Assembled Cables
  • PUR and PVC Options
  • Shielded or Unshielded
weidmuller-industrial-ethernet-switches

Industrial Ethernet Switches

  • Managed and Unmanaged
  • Gig E and POE
  • Support Copper (RJ45)
  • Fiber Optic (SC, ST, LC)
  • With Relay Status Contacts
  • Metal and Plastic Housings
weidmuller-ethernet-connectors

SteadyTEC® Ethernet Connectors

  • Modular System
  • 10-Gig Rated
  • Field Installable
  • Plastic and Metal Versions
  • Industry Variants 1,4 and 5
weidmuller-ethernet-connectors1

Media Converters

  • Fully Transparent
  • Fiber to Copper (RJ 45) (SC or ST)
  • Single Mode and Multimode
  • Transmission up to 60kms
weidmuller-wireless-ethernet

Wireless Ethernet

  • 2.4 GHz (WiFi)
  • 900 MHz FHSS
  • Access Point/Client; Bridge/Router
  • Omni and Yagi Antennas
  • 2+ Mile Range (2.4 GHz)
  • 20+ Mile Range (500 FHSS)
weidmuller-wireless-io

Wireless I/O

  • 900 MHz FHSS
  • Transceiver and Unidirectional Units
  • Full 1W of Broadcast Power
  • Modular I/O Design
  • 20+ Mile Range
weidmuller-antennas-accessories

Antennas and Accessories

  • Omni and Yagi
  • Mounting Brackets
  • Bulkhead Adaptors
  • Surge Arrestors
  • Patch Cables

Field

weidmuller-heavy-duty-connectors

RockStar® Heavy Duty Connectors

  • Individual Piece Parts Packaging
  • IP 65 Ingress Protection
  • Screw, Tension, Push-In and IDC Terminations
  • Nema 4X
  • Stainless Steel Latches
  • Laser Etched Part Numbers
weidmuller-heavy-duty-connectors1

Stainless and Mild Steel Painted Enclosures

  • Atex, IECEx, USO, UL Ex
  • IP 66 Ingress Protection (NEMA 4/4X)
  • High Temperature Gaskets -50C to +135C
  • 1-4 Gland Plate Configuration
  • 316L and 304 Stainless Steel
  • Mild Steel Painted Enclosures
weidmuller-field-power-distribution

Field Power Distribution

  • All-In-One Power Distribution System
  • Uses Single Field Trunk
  • IP 65 Ingress Protection (NEMA 4X)
  • UL Rated 600V / 14-10 AWG / 30A
weidmuller-cabtite

Through-Wall Wire Systems – Cabtite (KTV & KEL)

  • Configurable Frames for Multiple Wire Routing Requirements
  • Maintains IP 54 (NEMA 4)
  • For round Cable From 0.12”-1.34” and ASI Cable
  • Offers Integral Strain Relief When Assembled
  • Accommodates 40 wires in 4.33”
weidmuller-fieldbus-distributers

FBCon Fieldbus Distributers

  • Profibus-DP, Profibus-PA, Profibus-PA ATEX and Fieldbus Foundation
  • IP 65, IP 66 or IP 67
  • Surge Protection for Main Line
  • M12 or 7/8” Connections
  • Corrosion Resistant Stainless Steel Versions
weidmuller-sensor-actuator-interface

Sensor Actuator Interface

Distribution Blocks

  • Mounting Hood Integrated Control Cable or On-Board Connector
  • M5, M8 and M12

 

Fieldbus Modules

  • Analog Input/Output Modules
  • Profibus-DP, Device Net, CAN Open, Modbus TCP, Ethernet IP and Profinet
weidmuller-sensor-actuator

Sensor Actuator Cordsets

  • M5, M8, M12 and M23
  • High Flex for 20 Million Cycles
  • Weld Slag Resistant High Flex Robotic Cables
  • Fully Shielded
  • Field Installable Connectors
  • Valve Plug Versions
weidmuller-mountable-din-rail

Mountable DIN-Rail

  • Rail Series TS 15/32/35
  • Material: Steel, Stainless Steel, Copper, Aluminum
  • Types: Solid, Slotted,Hi-Rail, Shallow and Deep

Precision Tools

  • Cutting
  • Crimping
  • Stripping
  • Screwdrivers
weidmuller-marking-systems

Marking Systems

MCI Plotter

  • Prints over 160 Multicard Types Quickly Using Weidmuller’s M-Print Pro® Software

Print Jet Pro

  • The First Full Color Printer for Multicard Markers

Trapp Industrial Sales Engineers have the experience and the training to help you with all of your Weidmuller product line applications.

Please visit the “Meet our Reps” page to find your local contact.